NAVERQIO

Huila 83 Flat

160.000,00 Kč

Tax included where applicable. Delivery and installation arranged by your concierge.

Commissioned, not courieredDelivered, installed and dialled in by our own crew.
Two years, honestlyParts and labour EU-wide; parts stocked for fifteen.
Water firstBench-tested on your water report before dispatch.

NAVERQIO Grinders — where the cup is decided

The Huila is where the cup is actually decided: big flat burrs, matched and shimmed to zero chirp, dosing that lands within a tenth of a gram, and the low-retention path that makes dialling in cheap instead of wasteful.

A grinder is a bearing problem wearing a coffee costume. We use oversized sealed bearings, direct or belt drives chosen for the burr mass, and motors wound to reach speed without heating the grind path. Retention is engineered out with declumpers, bellows-ready throats and anti-static exits rather than promised away.

Design & Craft

  • Machined burr carriers hold alignment through shipping and seasons
  • Burr wear tracked by kilograms; replacements change in minutes
  • Quiet under load — low 70s dB(A) at full song
  • Commissioned and re-checked for alignment after transport
  • Burr pairs matched on an optical comparator and shimmed to zero chirp
  • Motor wound for torque without heat; sealed oversized bearings

Specifications

Burr set 83 mm flat, tool steel
Dosing Grind by weight, ±0.1 g
Retention Under 0.3 g measured
Sound Low 70s dB(A) under load
Power 230 V
Weight ≈ 12.3 kg
Burr life Rated in kg; stocked 15 years

Care

Brush the burr chamber weekly and run grinder cleaning pellets monthly; never wash burrs in water. Check alignment and burr wear at the annual service — we track burr life by kilograms and remind you before the cup does.

Questions, Answered

How long do burrs last?
Tool-steel burrs are rated in the specification (typically 800–1500 kg for shop sets); titanium-nitride coatings extend that two- to three-fold. Replacements are stocked for fifteen years and change in minutes.

How loud is it?
Measured sound levels are in the specification — our shop grinders run in the low 70s dB(A) under load, single-dosers quieter still. If the grinder is the loudest thing on your bar, something else is very right.

The NAVERQIO Promise

Trade up within five years and we buy the piece back at an honest, published rate — NAVERQIO equipment holds its value because we stand under it.