NAVERQIO

Limmu Single Dose

27.500,00 Kč

Tax included where applicable. Delivery and installation arranged by your concierge.

Commissioned, not courieredDelivered, installed and dialled in by our own crew.
Two years, honestlyParts and labour EU-wide; parts stocked for fifteen.
Water firstBench-tested on your water report before dispatch.

NAVERQIO Grinders — where the cup is decided

The Limmu grinds one dose and keeps none of it: bellows throat, anti-static exit, stepless travel from espresso to filter. Weigh in, weigh out, and the numbers agree — that is the whole trick, done properly.

A grinder is a bearing problem wearing a coffee costume. We use oversized sealed bearings, direct or belt drives chosen for the burr mass, and motors wound to reach speed without heating the grind path. Retention is engineered out with declumpers, bellows-ready throats and anti-static exits rather than promised away.

Design & Craft

  • Small footprint, full-size grind quality — a home bar's quiet flagship
  • Anti-static grind path with declumper — fluffy grounds, clean fork
  • Machined burr carriers hold alignment through shipping and seasons
  • Burr pairs matched on an optical comparator and shimmed to zero chirp
  • Commissioned and re-checked for alignment after transport
  • Stepless micro-adjustment travels espresso to filter and back

Specifications

Burr set 64 mm flat, tool steel
Adjustment Stepless, espresso to filter
Retention Under 0.2 g with bellows
Workflow RDT-friendly, dosing cup included
Power 230 V
Weight ≈ 4.4 kg
Warranty 2 years, burrs stocked 15

Care

Keep beans out of the hopper overnight, brush the exit path weekly, and use the bellows to clear retention between single doses. Burrs are replaceable in minutes with the included tool; alignment shims and instructions live under the top plate.

Questions, Answered

How loud is it?
Measured sound levels are in the specification — our shop grinders run in the low 70s dB(A) under load, single-dosers quieter still. If the grinder is the loudest thing on your bar, something else is very right.

How long do burrs last?
Tool-steel burrs are rated in the specification (typically 800–1500 kg for shop sets); titanium-nitride coatings extend that two- to three-fold. Replacements are stocked for fifteen years and change in minutes.

The NAVERQIO Promise

Two years parts and labour, fifteen years of parts on the shelf, and a service desk staffed by technicians who have actually stripped the model you own.